UV Sterilizer

The UV Sterilizer is an efficient, eco-friendly disinfection equipment that uses UVC band ultraviolet light for water sterilization and disinfection. It achieves physical sterilization without adding any chemicals, ensuring safe, clean water output and avoiding secondary pollution.

Ultraviolet (UV) light consists of three bands: UVA, UVB, and UVC, among which the UVC band is specifically used for sterilization and disinfection. The UV Sterilizer irradiates the water flow with UVC light, which disrupts the DNA or RNA structure of microorganisms in the water, thereby killing them effectively. It is widely applicable to drinking purified water, ultrapure water for electronics, pharmaceuticals, and biotechnology industries, as well as wastewater treatment, swimming pool water and landscape water disinfection. With the advantages of high-efficiency sterilization, safe operation, and continuous large-volume disinfection, it provides reliable disinfection solutions for various industrial, commercial, and civilian scenarios.

Notes:

• UV sterilizer with pressure greater than 6 kg requires custom manufacturing.

• Power supply: 220V/50Hz, UV lamp lifespan: ≥ 9000 hours.

• The equipment specified in this parameter table is suitable for the disinfection of clean water, such as tap water, purified water, and pharmaceutical water.

• Sterilization efficiency depends on the transparency, impurity content, and temperature of the water.

• Manual or automatic cleaning devices can be configured according to customer needs.

• High-Efficiency Sterilization: UV sterilization typically takes less than one second, which is far more efficient than traditional disinfection methods (such as chlorine or ozone) that require 20 minutes to an hour to achieve similar effects.

• No Secondary Pollution: No chemicals are added during the disinfection process, preventing secondary pollution of water and the surrounding environment, and not altering the original composition of the water.

• Safe and Reliable Operation: Unlike traditional disinfection methods (chlorine or ozone) that use highly toxic, flammable, and explosive disinfectants, the modern UV sterilizer does not pose such risks, ensuring safe operation for operators and the environment.

• Continuous Large-Volume Disinfection: The UV sterilizer can operate continuously 24 hours a day, 365 days a year, meeting the needs of large-volume, continuous water disinfection scenarios.

• Eco-Friendly & Low Maintenance: Physical sterilization without chemical additives is eco-friendly, and the equipment is maintenance-free, reducing operational costs and labor intensity.

• Customizable Configuration: Supports OEM/ODM customization based on user needs; equipment with pressure greater than 6 kg can be custom-manufactured, and manual or automatic cleaning devices can be configured as required.

• Wide Applicability: Suitable for drinking purified water, ultrapure water for electronics, pharmaceuticals, and biotechnology industries, as well as wastewater treatment, swimming pool water and landscape water disinfection.

• Drinking Purified Water Disinfection: Used for disinfection of drinking purified water, ensuring the safety and hygiene of drinking water, free from microbial contamination.

• Industrial Ultrapure Water Disinfection: Applicable to ultrapure water disinfection in electronics, pharmaceuticals, and biotechnology industries, meeting the high-standard water quality requirements of these industries.

• Wastewater Treatment: Used for wastewater disinfection, reducing microbial content in wastewater and meeting environmental discharge standards.

• Swimming Pool Water Disinfection: Applied to swimming pool water disinfection, killing bacteria, viruses, and algae in the water, keeping the pool water clean and complying with hygiene standards.

• Landscape Water Disinfection: Used for disinfection of landscape water (such as garden ponds, fountains), preventing water deterioration and microbial reproduction, maintaining clear and clean water quality.

• Other Clean Water Disinfection: Suitable for disinfection of other clean water such as tap water and pharmaceutical water, providing safe and reliable disinfection support.

Usage Methods

• Equipment Selection: Select the appropriate model according to the water volume, water quality (transparency, impurity content), and pressure requirements. For equipment with pressure greater than 6 kg, customize it as needed, and choose manual or automatic cleaning devices based on actual needs.

• Installation & Commissioning: Install the UV sterilizer on a flat, firm foundation, correctly connect the water inlet, water outlet, and power supply (220V/50Hz). Professional technicians will cmmission the equipment, test the UV lamp, and adjust the water flow to ensure sterilization efficiency.

• Daily Operation: Start the equipment, and the UV lamp will emit UVC light to irradiate the passing water flow for physical sterilization. The equipment can operate continuously 24 hours a day. Regularly check the operation status of the UV lamp and the water flow to ensure stable disinfection effect.

• Maintenance: Replace the UV lamp when its service life reaches 9000–12000 hours. Clean the equipment regularly using the configured manual or automatic cleaning device to avoid dirt accumulation affecting sterilization efficiency. Regularly check the water quality to ensure the sterilization effect meets requirements.

Safety Precautions

• Ensure the power supply is connected correctly (220V/50Hz) and the equipment is grounded to avoid electric shock hazards. Do not operate the equipment with wet hands.

• Do not look directly at the UV lamp when it is working, as UVC light may damage the eyes. Wear protective goggles if necessary during maintenance.

• The equipment is suitable for clean water disinfection; avoid treating water with excessive impurities, as it will affect sterilization efficiency. Pre-filter raw water if necessary.

• When replacing the UV lamp or performing maintenance, shut down the equipment and cut off the power supply first to prevent personal injury or equipment damage.

• For equipment with pressure greater than 6 kg, it must be custom-manufactured; do not use standard equipment under excessive pressure to avoid equipment damage or leakage.

• Store and use the equipment in a well-ventilated, dry environment, away from direct sunlight, high temperature, and corrosive substances, to extend the service life of the UV lamp and the equipment.

• Operators should be familiar with the equipment operation manual before use; avoid misoperation that may cause equipment failure or safety hazards.

• Keep the equipment out of the reach of children and unauthorized personnel to prevent misoperation and accidental injury.

FAQ

• Does the UV sterilizer require chemical additives?

No chemicals needed! Our UV sterilizer uses 254nm ultraviolet light to kill 99.9% of bacteria and viruses physically, making it eco-friendly and maintenance-free. It does not add any chemicals, avoiding secondary pollution of water and the surrounding environment.

• What is the lifespan of the UV lamp in your sterilizer?

Our UV lamps have a lifespan of 9,000–12,000 hours, which is approximately 1–1.5 years of continuous use. The specified minimum lifespan of the UV lamp is ≥ 9000 hours, ensuring long-term stable sterilization performance.

• Can we customize the equipment?

Yes, we offer OEM/ODM customization services based on your needs. In addition, UV sterilizer with pressure greater than 6 kg requires custom manufacturing, and we can also configure manual or automatic cleaning devices according to your specific requirements.

• Is your company a trading company or a manufacturer?

We are a professional manufacturer with in-house production and export capabilities. Our company integrates R&D, manufacturing, and international trade, with a complete production line and professional technical team. We provide factory-direct prices to reduce your procurement costs, and offer stable product quality, on-time delivery, and comprehensive pre-sales consultation and after-sales support.

• What factors affect the sterilization efficiency of the UV sterilizer?

The sterilization efficiency of the UV sterilizer depends on three main factors: the transparency of the water, the impurity content of the water, and the water temperature. To ensure the best sterilization effect, it is recommended to use the equipment for clean water disinfection, such as tap water, purified water, and pharmaceutical water.

• Can the UV sterilizer operate continuously?

Yes, the UV sterilizer can operate continuously 24 hours a day, 365 days a year, supporting large-volume continuous water disinfection, which is suitable for scenarios with high water demand and continuous disinfection needs.